aluminum profile channel

1.Product Features
Corrosion resistance
The density of Majestice® aluminum profile channel is only 2.7g/cm3, which is about 1/3 of the density of steel, copper or brass (7.83g/cm3, 8.93g/cm3, respectively). Under most environmental conditions, including air, water (or salt water), petrochemicals and many chemical systems, aluminum can show excellent corrosion resistance.

Conductivity
Majestice® Aluminum profile channel is often selected because of its excellent electrical conductivity. On the basis of equal weight, the conductivity of aluminum is close to 1/2 of that of copper.

Thermal conductivity
The thermal conductivity of aluminum alloy is about 50-60% of copper, which is beneficial to the manufacture of heat exchangers, evaporators, heating appliances, cooking utensils, and automobile cylinder heads and radiators.

Formability
The specific tensile strength, yield strength, ductility and corresponding work hardening rate dominate the change in allowable deformation.

Recyclability
Aluminum has extremely high recyclability, and the characteristics of recycled aluminum are almost indistinguishable from primary aluminum.

2.Production Process
Cast
Casting is the first process of Majestice® aluminum profile channel, the main process is:
(1) Ingredients: According to the specific alloy grades to be produced, calculate the addition amount of various alloy components, and reasonably match various raw materials.
(2) Smelting: The prepared raw materials are melted in the melting furnace according to the process requirements, and the slag and gas in the melt are effectively removed by degassing and slagging refining methods.
(3) Casting: Under certain casting process conditions, the molten aluminum is cooled and casted into round casting rods of various specifications through a deep well casting system.

extrusion
Extrusion is a means of forming profiles. First, design and manufacture a mold according to the profile product section, and use an extruder to extrude the heated round cast rod from the mold. The commonly used grade of 6063 alloy also uses an air-cooling quenching process and subsequent artificial aging process during extrusion to complete the heat treatment strengthening. Different grades of heat-treatable and strengthened alloys have different heat treatment systems.

3.FAQ:
Q:Can you produce according to the samples?
A:Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q:How to ship?
A:Sea freight,Air freight,express;
Q:What is your terms of delivery?
A:We can do EXW, FOB,FCA, CFR, CIF.ect