High Performance Aluminum Plate Fin Custom Oil Cooler Radiator Manufacturer, Plate fin aluminum charge air cooler is to reduce the temperature of the pressurized high temperature air, reduce the thermal load of the engine, increase the intake air volume, and increase the power of the engine.
1.Product Introduction
None-standard Aluminum Auto Plate-fin Intercooler is to reduce the temperature of the pressurized high temperature air, reduce the thermal load of the engine, increase the intake air volume, and increase the power of the engine. For supercharged engines, the plate fin aluminum intercooler is an important component of the booster system. Whether plate fin aluminum charge air cooler is a supercharged engine or a turbocharged engine, an intercooler needs to be installed between the supercharger and the intake manifold.
2. Product advantages
1. None-standard Aluminum Auto Plate-fin Intercooler has Higher heat transfer coefficient: the material of the plate is made of higher thermal conductivity.
2. Because the heat transfer plates are closely arranged, the plate spacing is small, and the surface forms a corrugated metal plate, which greatly increases the effective heat transfer area. Therefore, the heat transfer area per unit volume is large, and the volume is significantly smaller than the same heat exchanger case. The transfer area of the body and tube.
3.Plate fin aluminum charge air cooler has high efficiency, simple structure, small heat loss, small heat transfer coefficient, small floor space, flexible assembly, simple operation, convenient maintenance, convenient installation and disassembly, and long service life.
3.Product Parameter (Specification)
|
NO. |
ITEM |
CONTENT DESCRIPTION |
|
1 |
Material |
Aluminum alloy |
|
2 |
Outer Dimension Limit |
Customized |
|
3 |
Production Technique |
Vacuum brazing and arc welding |
|
4 |
Thermal capacity |
Customized |
|
5 |
Gas flow rate |
Customized |
|
6 |
Inlet temperature |
Customized |
|
7 |
Outlet temperature |
Customized |
|
8 |
Cold air inlet / outlet temperature |
Customized |
|
9 |
Cold air flow rate |
Customized |
FAQ:
Q:Do you test all your goods before delivery?
A:Yes, we have 100% test before delivery.
Q:Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q:What is your terms of packing?
A:Generally, we pack our goods in wooden boxes .
